荔园在线

荔园之美,在春之萌芽,在夏之绽放,在秋之收获,在冬之沉淀

[回到开始] [上一篇][下一篇]


发信人: georgehill (清风浮云 人生), 信区: Linux
标  题: 支持Linux的显卡性能综合对比(二)(转寄)
发信站: BBS 荔园晨风站 (Thu Oct 19 16:24:06 2000), 站内信件

【 以下文字转载自 georgehill 的信箱 】
【 原文由 georgehill.bbs@melon.gznet.edu.cn 所发表 】
发信人: nic (心只有美!), 信区: Linux
标  题: 支持Linux的显卡性能综合对比(二)(转寄)
发信站: 华南网木棉站 (Thu Oct 19 12:58:34 2000), 站内信件

【 以下文字转载自 nic 的信箱 】
发信人: chenhao (努力学习), 信区: Linux
标  题: 支持Linux的显卡性能综合对比(二)(转寄)
发信站: 北大未名站 (Tue Oct 17 12:40:16 2000) , 转信

                         第一部份:如何安装XFree86
作者:panda

【ChinaByte 专栏】多初次学习Linux的朋友都觉得安装XFree86 是一个比较烦琐的问
题,但为了能在Linux下使用高档显卡就必须要正确的安装好XFree86。这样当你把XFr
ee86 和显卡完全安装配置好以后,才能使用DRI进行硬件加速,否则你高档的显卡就不
能完全发挥它的3D加速性能。

  许多最新的Linux发行版本都包含有XFree86 4.0.1应用软件包。例如Red Hat 7.0
 和 SuSE 7.0 Linux就有此软件包。旧版本的Linux没有 XFree86 4.0.1。现在就以Re
d Hat 7.0为例子来安装XFree86 4.0.1。Red Hat 7.0的Linux智能化程度相当高,安装
好后能自动完成一些显卡的配置工作。不过,要安装诸如NVIDIA和MATROX的显卡就必须
在Red Hat 7.0里进行一些参数的设置,尽管要修改一些参数,但这个过程还是相当的
容易的。

  开始安装之前,你需要一个最基本的软件:/etc/X11/XF86Config (Red Hat 7.0
 使用的是uses /etc/X11/XF86Config-4 ,只要能支持XFree86 3.3.6和 4.0.1都可以
的)。安装过程中可能会出现系统警告说显示器超出显示范围,这时千万要注意修改显
示器的参数,使之适应显卡的显示范围。

  具体安装可按照如下命令进行:

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath " /usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
Load "dri"
EndSection

Section "ServerFlags"
Option "blank time" "10" # 10 minutes
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
EndSection

Section "InputDevice"
Identifier "Keyboard"
Driver "keyboard"
EndSection

Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "PS/2"
EndSection

Section "Monitor"
Identifier "Monitor"
HorizSync 30-95
VertRefresh 50-150
Option "dpms"
EndSection

Section "Device"
Identifier "Video Card"
Driver "mga"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen 1"
Device "Video Card"
Monitor "Monitor"
DefaultDepth 16

SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection

SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection

SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Simple"
Screen "Screen 1"
InputDevice "Mouse" "CorePointer"
InputDevice "Keyboard" "CoreKeyboard"
EndSection


--
※ 来源:.北大未名站WWW bbs.pku.edu.cn. [FROM: 162.105.45.126]
--
※ 转寄:·北大未名站 bbs.pku.edu.cn·[FROM: 202.38.248.201]
--
※ 转载:.华南网木棉站 bbs.gznet.edu.cn.[FROM: 202.38.248.201]
--
※ 转寄:.华南网木棉站 bbs.gznet.edu.cn.[FROM: 210.39.3.97]
--
※ 转载:·BBS 荔园晨风站 bbs.szu.edu.cn·[FROM: 192.168.1.115]
※ 修改:·jjksam 於 Mar  1 12:09:30 修改本文·[FROM: 192.168.0.146]


[回到开始] [上一篇][下一篇]

荔园在线首页 友情链接:深圳大学 深大招生 荔园晨风BBS S-Term软件 网络书店