荔园在线
荔园之美，在春之萌芽，在夏之绽放，在秋之收获，在冬之沉淀
[回到开始]
[上一篇][下一篇]
发信人: ykwch.bbs@bbs.cqupt.edu.cn (心蓝--雨下), 信区: Linux
标 题: about rh9
发信站: 幽幽黄桷兰 (Tue Apr 1 10:34:57 2003)
转信站: SZU!news.tiaozhan.com!news.happynet.org!CQUPT
Hardware Requirements
The following information represents the minimum hardware requirements
necessary to successfully install Red Hat Linux 9:
CPU:
- Minimum: Pentium-class
- Recommended for text-mode: 200 MHz Pentium-class or better
- Recommended for graphical: 400 MHz Pentium II or better
Hard Disk Space (NOTE: Additional space will be required for user data):
- Custom Installation (minimum): 475MB
- Server (minimum): 850MB
- Personal Desktop: 1.7GB
- Workstation: 2.1GB
- Custom Installation (everything): 5.0GB
Memory:
- Minimum for text-mode: 64MB
- Minimum for graphical: 128MB
- Recommended for graphical: 192MB
Note that the compatibility/availability of other hardware components
(such as video and network cards) may be required for specific
installation modes and/or post-installation usage. For more information
about hardware compatibility, see the Red Hat Linux Hardware Compatibility
List at http://hardware.redhat.com/hcl/
Installation-Related Notes
This section outlines those issues that are related to Anaconda (the Red
Hat Linux installation program) and installing Red Hat Linux 9 in
general.
o The Red Hat Linux installation program has the ability to test the
integrity of the installation media. It works with the CD, DVD, hard
drive ISO, and NFS ISO installation methods. Red Hat recommends that
you test all installation media before starting the installation
process, and before reporting any installation-related bugs (many of
the bugs reported are actually due to improperly-burned CDs). To use
this test, type linux mediacheck at the boot: prompt.
o While most present-day computers are able to start the installation
process by booting directly from the first Red Hat Linux distribution
CD, some hardware configurations require the use of a boot diskette.
If your hardware requires a boot diskette, you should be aware of the
following change.
Red Hat Linux 9 uses a different boot diskette layout than
previous releases of Red Hat Linux. There is now a single boot
diskette image file (bootdisk.img) that is used to boot all systems
requiring a boot diskette.
If you are performing anything other than an installation from an IDE
or USB device, you will be asked to insert a driver diskette created
from one of the following image files:
- drvnet.img - For network installations
- drvblock.img - For SCSI installations
- pcmciadd.img - For PCMCIA installations
As with previous releases of Red Hat Linux, these image files can be
found in the images/ directory on the first installation CD.
o Also in the images/ directory is the boot.iso file. This file is an
ISO image that can be used to boot the Red Hat Linux installation
program. It is a handy way to start network-based installations
without having to use multiple diskettes. To use boot.iso, your
computer must be able to boot from its CD-ROM drive, and its BIOS
settings must be configured to do so. You must then burn boot.iso onto
a recordable/rewriteable CD-ROM.
--
蒹葭苍苍白露为霜所谓伊人在水一方溯洄从之道阻且长
溯游从之宛在水中央
蒹葭萋萋白露未晞所谓伊人在水之湄溯洄从之道阻且跻
溯游从之宛在水中坻
蒹葭采采白露未已所谓伊人在水之涘溯洄从之道阻且右
溯游从之宛在水中沚
※ 来源:·幽幽黄桷兰 bbs.cqupt.edu.cn·[FROM: BlueCrystal]
[回到开始]
[上一篇][下一篇]
荔园在线首页 友情链接：深圳大学 深大招生 荔园晨风BBS S-Term软件 网络书店