荔园在线
荔园之美，在春之萌芽，在夏之绽放，在秋之收获，在冬之沉淀
[回到开始]
[上一篇][下一篇]
发信人: xsinuz.bbs@bbs.tju.edu.cn.no.spam (咸有一德), 信区: Linux
标 题: 在VMWare上面的minix安装
发信站: 天大求实BBS站 (Tue Mar 22 19:43:53 2005)
转信站: SZU!news.szu.edu.cn!bbsnews.sdu.edu.cn!news.feeling.smth.org!news2.happ
一时性起决定在VMWare上面的minix安装看看，我看VMWare跑个Minix还可以！
我是从202.113.12.9的ftp上面下载的Minix安装盘。里面有用的就是Minix文件夹了，其
中的I386目录下面有ROOT,USR,USR.TAZ三个文件。它们是三张软盘的镜像文件，VMWare可以
认识它。创建一个软驱使用ROOT这个文件作为镜像文件。VMWare的设置十分简单，有一个硬
盘比30M大就可以了，内存设个8M也就好了，其他的都不用。
让VMWare从软驱启动，可以看见
Minix 2.0.0 Copyright 1997 Prentice-Hall, Inc.
Executing in 32-bit protected mode
Memory size = 8010K MINIX = 295K RAM disk = 480K Available = 7236K
RAM disk loaded.
Tue Oct 1 16:21:37 MET 1996
Finish the name of device to mount as /usr: /dev/
这时候，在软驱中加载USR这个软盘镜像文件，而后在/dev/后面输入 fd0 (就是软盘1)
。
回车后可以看见系统启动了，可以用root登陆，没有密码。
/dev/fd0 is read-write mounted on /usr
Starting standard daemons: update.
Login as root and run 'setup' to install Minix.
Minix Release 2.0 Version 0
noname login:root
目前，一个Minix系统就启动了，^_^
进入安装程序，执行setup程序即可进入自动安装（我实在是没办法用手工安装;) ）
# setup
This is the Minix installation script.
Note 1: If the screen blanks suddenly then hit F3 to select "software
scrolling".
Note 2: If things go wrong then hit DEL and start over.
Note 3: The installation procedure is described in the manual page
usage(8). It will be hard without it.
Note 4: Some questions have default answers, like this: [y]
Simply hit RETURN (or ENTER) if you want to choose that answer.
Note 5: If you see a colon (:) then you should hit RETURN to continue.
:
<回车确认>
What type of keyboard do you have? You can choose one of:
french italian latin-am scandinavn uk us-swap
german japanese olivetti spanish us-std
Keyboard type? [us-std]
<回车使用默认键盘，一般可以的！>
Minix needs one primary partition of at least 30 Mb (it fits in 20 Mb, but
it needs 30 Mb if fully recompiled. Add more space to taste.)
If there is no free space on your disk then you have to back up one of the
other partitions, shrink, and reinstall. See the appropriate manuals of the
the operating systems currently installed. Restart your Minix installation
after you have made space.
To make this partition you will be put in the editor "part". Follow the
advice under the '!' key to make a new partition of type MINIX. Do not
touch an existing partition unless you know precisely what you are doing!
Please note the name of the partition (hd1, hd2, ..., hd9, sd1, sd2, ...
sd9) you make. (See the devices section in usage(8) on Minix device names.)
:
<开始分区，回车开始吧！>
Select device ----first---- --geom/last-- ------sectors-----
Device Cyl Head Sec Cyl Head Sec Base Size Kb
/dev/hd0 ? ? ?
? ? ? ? ? ? ? ? ?
Num Sort Type
? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ?
Type '+' or '-' to change, 'r' to read, '?' for more help, '!' for advice
分一个去就可以看了，使用r读取分区，然后用上下选取hd1然后将size位置设个几十M，
如33333kb什么的。分完了用q键推出，s保存。
Save partition table? (y/n) y
Please finish the name of the primary partition you have created:
(Just type RETURN if you want to rerun "part") /dev/hd1
You have created a partition named: /dev/hd1
The following subpartitions are about to be created on /dev/hd1:
Root subpartition: /dev/hd1a 1440 kb
/usr subpartition: /dev/hd1c rest of hd3
Hit return if everything looks fine, or hit DEL to bail out if you want to
think it over. The next step will destroy /dev/hd3.
:
回车后，机会格式化硬盘（我这里老出问题，尝试了三四回才好，不行就多试试）。
而后就开始安装/usr分区，然后会提示你在软驱中装入ROOT盘。
接着系统就会安装/分区。
哈哈哈，大功告成！
现在可以用halt关机，进入boot界面，然后用 boot hd1启动新的系统……
# halt
System Halted
fd0>boot hd1
--
※ 来源:．天大求实BBS http://bbs.tju.edu.cn [FROM: 202.113.4.55]
[回到开始]
[上一篇][下一篇]
荔园在线首页 友情链接：深圳大学 深大招生 荔园晨风BBS S-Term软件 网络书店