● Quake3 Server How-to - 荔园在线 | 深圳大学学生论坛,荔园晨风BBS,深大在线网站

荔园之美，在春之萌芽，在夏之绽放，在秋之收获，在冬之沉淀

发信人: Lg (创造人生的传奇), 信区: Linux
标  题: Quake3 Server How-to
发信站: BBS 荔园晨风站 (Mon Jan 31 13:19:51 2000), 转信

Quake3 Server How-to
  by Terry Warner and Cory Visi - Sat, 29 Jan 2000 12:07:23am

Written by: Terry Warner

Co-Written by: Cory Visi

Edited by: Jeff Alami

First off, this howto will give some background information on what quake3 is,
what a quake3 server is, and the general feel of quake3.

Quake 3 Arena is a game put out by iD Software, the linux port of this game was
done by Loki Games. This game is another series in the popular Quake series.
The game itself has massive improvements over it's predecessors Quake I, and
Quake II.

Some of the improvements over the older versions of Quake are, the graphics and
characters are better designed, the graphics engine in the game itself is
spectacular. The gameplay flows beautifully, with true-to-life animation, and
increadible level design. This new version of Quake, is definatly one of the
most intense games, and one of the best first person shooting games out there.

Now for those of you asking, "What is a Quake 3 server?". The answer itself is
simple. A Quake 3 server is a virtual location for Quake 3 players from all
over the network (in most cases, the Internet) to connect to and frag each
other. Now you might ask why you would want to run a Quake 3 server? Well the
answer to that is. It is more fun then you can imagine!

There are a few basic things you need to know before you setup a Quake 3
server.
The first of course is what type of system you should have, and what are the
minu requirments. The requirments for your system and hardware are as follows:

MINIMUM SYSTEM REQUIREMENTS:

(This is our personal opnion)

Linux kernel version 2.2.9 or above, glibc-2.1

Pentium II 266MHz processor or above

64 to 128 MB of ram (depending on what type of server load you expect)

500 MB of HD space (for maps and skins, etc.)

Dedicated internet connection (such as Cable, DSL, or T1) both Downstream and
upstream should be a decent connection

You also need a working install of Quake 3 Arena

These are all subject to the amount of people you intend to have on your quake
3 server at one time.

The next thing we will cover is setting up the config file. The config file is
the base of the server, and holds all the aspects of the server. The server
will behave according to how the config file is setup.

You can make changes to the config file as you see fit. Once you restart the
server the new changes will take affect. If you don't want to make changes
directly to the config file or do not feel like restarting the server, you can
make changes directly in your console window, but the changes will not stick.
This option is for people who want to try out new settings for a game or two,
and see how users react to them.

Below is the server config file used for quake.linux.com. The quake.linux.com
Quake 3 server is very stable with this config. It holds up to 50 people a
night, depending on the night. You may use this file as an example:

----------------------------------------------------

set sv_hostname "Linux.Com"

set sv_maxclients 50

set g_motd "For less lag, /rate 25000"

set g_quadfactor 4

set g_weaponrespawn 1

set g_forcerespawn 0

set rconpassword "some_rcon_passwd"

set d1 "map q3dm7 ; set nextmap vstr d2"

set d2 "map q3dm1 ; set nextmap vstr d3"

set d3 "map q3dm17 ; set nextmap vstr d4"

set d4 "map q3tourney2 ; set nextmap vstr d1"

vstr d1

--------------------------------------------------

Starting the server:

Once the server.cfg file is setup, you are ready to run the server itself. To
start the server up, all you need to do is run a command line like this:

nohup quake3 +set dedicated 1 +exec server.cfg &

That will bring the server up. Now people can connect to your server. For
people who can't watch the server 24/7 you can use a cronjob with a script to
keep the server up. Below is an example of a script you could possibly use:

---------------------------------------------------

!#/bin/sh

quake3dir="/usr/local/games/quake3"

binname="quake3"

cd $quake3dir

process=`ps auxwww | grep inet | grep -v grep | awk '{print $12}'`

if [ -z process ]; then

    echo "Couldn't find quake 3 running. Restarting it"

    nohup quake3 +set dedicated 1 +exec server.cfg &

    echo ""

fi

---------------------------------------------------

This script you could either put in your $home/bin or somewhere on the server,
and have cron run it every 5 to 10 minutes by adding this line in a cron file:

*/10 * * * * /path/to/the/script >/dev/null 2>&1

From here, you will need clients to connect to your server. To succsefully
connect to a quake 3 server, you must exacute a command from the console window
of quake 3. To do that use this command:

The ` button on your keyboard will bring up the console window, from there all
you need to type is:

connect somehost.com

Thats it, if the server is up and running, you will be connected to a Quake 3
game, and can frag to your hearts content.

This howto is a general summary of how to start and config a quake3 linux
server. This by no means covers every aspect of the server itself, but it is
here as a general guideline for setting up a quake 3 server for the first time.

If you would like to see things added to this how-to please feel free to email:

Terry Warner (keerf@linux.com)

or Cory Visi (cvisi@linux.com)

We will take whatever suggestions you have to offer and add then into this
how-to. This document will be updated over time, with more detailed and
in-depth instructions on how to run a quake3 server succesfully.

[ return to games ]

--
☆ 来源:．BBS 荔园晨风站 bbs.szu.edu.cn．[FROM: bbs@202.104.99.229]

荔园在线首页友情链接：深圳大学深大招生荔园晨风BBS S-Term软件网络书店