荔园在线

荔园之美,在春之萌芽,在夏之绽放,在秋之收获,在冬之沉淀

[回到开始] [上一篇][下一篇]


发信人: georgehill (人生不定式), 信区: Linux
标  题: ISO SGI ProPack 1.3 for Linux.(转寄)
发信站: BBS 荔园晨风站 (Sat Sep 16 00:21:32 2000), 站内信件

【 以下文字转载自 georgehill 的信箱 】
【 原文由 georgehill.bbs@smth.org 所发表 】
发信人: suzhe (莫烦小弟), 信区: Linux
标  题: ISO SGI ProPack 1.3 for Linux.(转寄)
发信站: BBS 水木清华站 (Fri Sep 15 16:52:15 2000)

ftp://ftp.gnuchina.org/pub/ISO/SGI/ProPack1.3.iso

======================================================================

SGI ProPack 1.3 for Linux README

This file describes new features provided with the SGI ProPack 1.3 for
Linux. See the "SGI ProPack 1.3 for Linux Start Here" for information on
features supported in previous releases that enhance the features of
supported Linux distributions.

The errata that describes issues which arose too late in the release cycle
to be included in this document and provides help with all known problems is
available at the following URL:

http://support.sgi.com/linux

Manuals for installing your base Linux distribution and getting started in
using it are included with your base Linux distribution release kit. Use
these manuals as a reference for information not included in this guide. If
you need to reinstall your base distribution, you must read the
the "SGI ProPack 1.3 for Linux Start Here" for information about configuring
SGI monitors on the base distribution.

Documentation for the SGI ProPack 1.3 software and for Linux in general,
including man pages, HOWTO guides, and other relevant documentation from the
Linux Documentation Project, is available from the following URL:

http://techpubs.sgi.com

SGI maintains the following Web site for open source information that
describes projects related to its open source efforts:

http://oss.sgi.com

Note: Packaged with the SGI ProPack 1.3 software is a separate sheet that
contains the Software License Agreement. This software is provided to you
solely under the terms and conditions of the Software License Agreement.
Please take a few moments to review the Agreement.

------------------------------------------------------------------------

Feature Overview

The SGI ProPack 1.3 for Linux includes modules that provide manageability
and scalability for Internet and high-performance clustering applications.

The SGI ProPack 1.3 for Linux is an overlay product that adds to or enhances
features in base Linux distributions from Red Hat (version 6.2), SuSE
(version 6.4), or TurboLinux (version 6.0).

The SGI ProPack 1.3 software will most likely come preinstalled on your SGI
platform. If you should need to install it, be aware that you must install
one of the supported base Linux distributions using the base distributor's
installation tools and then install the SGI ProPack software using the
ProPack installer. This is also true if you are upgrading from an earlier
version of the SGI Linux Environment. Installation and configuration is
described in the "SGI ProPack 1.3 for Linux Start Here".

Some of the most significant features that SGI ProPack 1.3 for Linux
provides are as follows:

   * Support for the Advanced Linux Sound Architecture (ALSA) drivers. These
     drivers make up the newest sound subsystem for Linux and contain many
     sound card drivers not previously available.

   * Performance Co-Pilot (PCP) is a framework and set of services that
     support system-level performance monitoring and performance management.
     The PCP open source release provides a unifying abstraction for all of
     the interesting performance data in a system, and allows client
     applications to easily retrieve and process any subset of that data
     using a single API. The base software is included with SGI ProPack
     1.3 for Linux.

   * The device file system (DEVFS) is turned on by default. Sites that
     expect to connect a large number of devices may find DEVFS very useful
     in helping to manage them.

   * The "bigmem" kernel support for large memory systems that was available
     in previous SGI Linux releases has been replaced with the Linux
     community standard implementation.

   * SGI ProPack 1.3 for Linux provides a number of bugfixes for the NFS
     server and client.

   * The SGI ProPack 1.3 for Linux software is designed to run on any x86
     Linux system, but only the SGI platforms are guaranteed. SGI hardware
     platforms supported by this release are documented at the following
     URL:

     http://support.sgi.com/linux

------------------------------------------------------------------------

Qualified Drivers

QLogic 1080/1280 and 2100 drivers have been supplied by QLogic Corporation,
and include updated firmware and improved error handling. The Alteon Gigabit
Ethernet driver has been modified to recognize and drive the SGI Gigabit
Ethernet card.

The SGI ProPack 1.3 for Linux works with other drivers. You can check the
following URL for a complete list:

http://support.sgi.com/linux

------------------------------------------------------------------------

Patches and Changes to Base Linux Distributions

This section provides an overview of changes the SGI ProPack 1.3 software
makes in your base Linux distribution.

The following packages were added by SGI:

   * kernprof 1.0 (kernel profiling tool to identify performance
     bottlenecks)

   * ktrace 1.0 (kernel trace tool)

   * libdba.so 1.0 (APIs to enhance database performance)

   * lockstat 1.0 (spinlock metering analysis)

   * sard 0.2 (disk activity statistics/analysis)

   * sgi-logos 1.0.1 (SGI logos)

   * sgi-fonts 1.0 (SGI fonts)

   * sgi-extra-RedHat 1.3 (manipulate system files for SGI value-added
     features)

   * sgi-extra-SuSE 1.3 (manipulate system files for SGI value-added
     features)

   * sgi-extra-TurboLinux 1.3 (manipulate system files for SGI value-added
     features)

   * sgi-initscripts-RedHat 1.0 (manipulate init scripts for SGI value-added
     features)

   * sgi-initscripts-SuSE 1.0 (manipulate init scripts for SGI value-added
     features)

   * sgi-initscripts-TurboLinux 1.2 (manipulate init scripts for SGI
     value-added features)

   * sgi-release (SGI release identification)

   * XFree86 4.0 (approximately 40 RPMs for the 230 hardware platform)

   * devfsd 1.3.1 (daemon that allows backwards compatibility with old
     device file system.

   * knfsd 1.4.7 (provides kernel NFS server and related tools)

   * mkinitrd 2.3 (creates an initial ramdisk image for preloading modules.
     Only installs on SuSE, because RedHat and TurboLinux distributions
     already have this RPM.

   * mount-2.9u-4_nfsv3 0.3 (provides mount support for NFS version 3)

   * sgi-propackdocs 1.3 (HTML-formatted documentation for SGI ProPack 1.3
     for Linux)

   * sgi-propackdocs-print 1.3 (PDF-formatted documentation for SGI ProPack
     1.3 for Linux)

--
Smart Boot Manager -- One of the most powerful Boot Managers in the world!

http://gnuchina.org/~suzhe/
http://btmgr.gnuchina.org/
http://bootmanager.gnuchina.org/
http://btmgr.sourceforge.net/


※ 来源:·BBS 水木清华站 smth.org·[FROM: 210.73.87.125]
--
※ 转载:·BBS 荔园晨风站 bbs.szu.edu.cn·[FROM: 192.168.1.115]


[回到开始] [上一篇][下一篇]

荔园在线首页 友情链接:深圳大学 深大招生 荔园晨风BBS S-Term软件 网络书店