荔园在线
荔园之美,在春之萌芽,在夏之绽放,在秋之收获,在冬之沉淀
[回到开始]
[上一篇][下一篇]
发信人: alone (记住要“胸无大志”!), 信区: Newsoftware
标 题: Re: 赛扬1G能不能用autocad
发信站: 荔园晨风BBS站 (Mon Apr 2 15:02:11 2007), 站内
强调一下,能用和用的好之间有很大的差距。下面是autocad2008推荐的系统配置,你可以
在任何版本的“帮助”中找到相应的信息。
ps:现在基本是没人用r14以前的版本了
ps2:autocad的操作基本都一样,新版本都有一些新的东西增加,个人觉得都还不错,尽量
用新一点的版本。
Autocad 2008
System Requirements
Before you install your product on a stand-alone computer, make sure that your
computer meets the minimum system requirements. See the following table for
hardware and software requirements.
Hardware and software requirements
Hardware/Software
Requirement
Notes
Operating system
(32-Bit)
Windows® XP Professional, Service Pack 2
Windows XP Home, Service Pack 2
Windows 2000, Service Pack 4
Windows Vista Enterprise
Windows Vista Business
Windows Vista Ultimate
Windows Vista Home Premium
Windows Vista Home Basic
Windows Vista Starter
(64-Bit)
Windows XP Professional
Windows Vista Enterprise
Windows Vista Business
Windows Vista Ultimate
Windows Vista Home Premium
Windows Vista Home Basic
It is recommended that non-English language versions of AutoCAD be installed
on an operating system with a user interface language that matches the code
page of the AutoCAD language. A code page provides support for character sets
used in different languages.
Whether the Windows operating system is the 32-bit or the 64-bit version is
automatically detected when installing AutoCAD. The appropriate version of
AutoCAD will be installed. The 32-bit version of AutoCAD cannot be installed on
a 64-bit version of Windows.
Web browser
Microsoft Internet Explorer 6.0, Service Pack 1 (or later)
You cannot install AutoCAD if Microsoft Internet Explorer 6.0 with Service
Pack 1 (or later) is not installed on the installation workstation. You can
download Internet Explorer from the Microsoft website:
http://www.microsoft.com/downloads/
Processor
Pentium III or IV (Pentium IV recommended) 800 Mhz
RAM
512 MB (recommended)
Graphics card
1024 x 768 VGA with True Color (minimum)
Open GL®-compatible 3D video card (optional)
Requires a Windows-supported display adapter.
For graphic cards that support Hardware Acceleration, DirectX 9.0c, or better,
must be installed.
Installing from the ACAD.msi file does not install DirectX 9.0c, or better.
Manual installation of DirectX is required, in this circumstance, for Hardware
Acceleration to be configured.
Hard disk
Installation 750 MB
Pointing device
Mouse, trackball, or other device
CD-ROM
Any speed (for installation only)
Optional hardware
Printer or plotter
Digitizer
Modem or access to an Internet connection
Network interface card
Additional recommendations for 3D use
Hardware/Software
Requirement
Notes
Operating system
Windows® XP Professional, Service Pack 2
It is recommended that non-English language versions of AutoCAD be installed
on an operating system with a user interface language that matches the code
page of the AutoCAD language. A code page provides support for character sets
used in different languages.
Processor
3.0 GHz or greater
RAM
2 GB (or greater)
Graphics card
128 MB or greater, OpenGL-capable workstation-class For graphic cards that
support Hardware Acceleration, DirectX 9.0c, or better, must be installed.
Installing from the ACAD.msi file does not install DirectX 9.0c, or better.
Manual installation of DirectX is required, in this circumstance, for Hardware
Acceleration to be configured.
For more information about tested and certified graphics cards, visit
http://www.autodesk.com/autocad-graphicscard/.
Hard disk
2 GB (in addition to the 750 MB required for installation)
【 在 zhaozhikun (叉烧) 的大作中提到: 】
: 当时我的配置是奔腾4 1.8G,1GB内存 Geforece4 32MB显卡,装了AutoCAD2006以后特别
卡,根本不能正常使用。。。建议你去装较早版本的R12或者R14,因为后来我发现我的新主
机奔腾D830,2GB DDR2 533内存 在AutoCAD2006的环境里当“块”多了的时候还是会卡。
--
深大四大幸事:
久饭无遇虫,夜深不断网;荔园全天开,网速提升时。
※ 来源:·荔园晨风BBS站 http://bbs.szu.edu.cn·[FROM: 219.133.81.144]
[回到开始]
[上一篇][下一篇]
荔园在线首页 友情链接:深圳大学 深大招生 荔园晨风BBS S-Term软件 网络书店